This event has passed.
Turning Boxes with Richard Raffan
13 February, 2021 @ 9:00 am - 4:00 pm
You must be accredited on the lathe to attend this workshop.
This workshop helps you turn end grain boxes with suction-fit lids —it takes you through Ch.4 in Turning Boxes. How many you complete will depend on how familiar you are with the process.
Tools
¾-in or 20mm skew chisel
½-in spindle gouge
3/8-in spindle or detail gouge
13 or 20mm square-end scraper
¾-in round-nose scraper
Parting tool.
(Guild tools and safety gear will be available, but it’s best to bring your own.)
Blanks
50mm – 100mm square, up to 250mm long with the grain running the length of the blank.
As always, morning & afternoon tea provided, but bring your own lunch
